74947 6000 Series.jpg

TORO 74926 ZMaster Professional 6000 Series 26.5HP Kohler EFI 60 Inch TFD

Product Description

smemail icon
BIN # 10965


The Toro Z Master Professional 6000 Series is Toro’s most advanced zero-turn radius mower, now with maximum comfort.

Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

Industry’s Toughest Spindle Assemblies
Toro’s rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.

72″ Deck will have tapered bearing only.

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4″ (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smooth, Powerful Response
The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Convenience and Comfort
Operator controls are conveniently located. Large 1-5/8″ (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

Engine 26.5 HP* Kohler EFI 747cc
Fuel Capacity Gasoline – 12 gallons (45 L) single-point fill
Adjustable Discharge Baffle Standard, tools-free
Air Filter Heavy-Duty Canister Air Cleaner
Blade Tip Speed 18,500+ ft/min (5,640 m/min)
Blade Type 1/4″ (6 mm) thick heat-treated steel
Carrier Frame 3″ x 1-1/2″ (7.6 x 3.8 cm) tubular steel
Caster Tires 13″ x 6.5″- 6″ (33 cm x 16.5 -15.2 cm) flat-free semi-pneumatic
Deck Design 7-gauge 60″ (152 cm) TURBO FORCE® w/bull-nose bumper
Discharge Chute Rubber
Drive System Hydraulic unitized pumps and wheel motors
Drive Tires 24″ x 12″ – 12″ (61 cm x 30.5 – 30.5 cm)
Ground Speed 11.5 mph forward (19 km/h)
Height of Cut 1″ – 5.5″ in 1/4″ (2.5 – 14 cm in 6 mm) increments
Hour Meter Standard
Hydraulic Fluid Premium synthetic
ROPS Folding; standard
Seat Deluxe suspension
Spindle Bearings Greasable ball bearings
Spindle Housing Cast iron
Steering Controls 1-5/8″ (4 cm) dia. levers; adjustable
Disclaimer *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

E-Z Vac™ DFS Collection System
Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds – without ever having to leave your seat!

E-Z Vac Twin & Triple Bagger Systems
Toro® Z Master® E-Z VacTM Twin and Triple Baggers deliver the convenience and versatility essential to landscape professionals’ productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

Light Kit
The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit. # 116-1154

Operator-Controlled Discharge Chute
Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.

Optional Blades
In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4″ (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Recycler® Mulching Kits
Recycler mulching kits deliver the industry’s finest mulching performance and reduce mowing time up to 38% vs. bagging*.
*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn’t bag. #115-7468

Roller Striping Kit
Roller striping kit is easily installed and provides a premium “ball park” after-cut appearance. #115-7470

Toro Z Stand
Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck. #121-4811

Additional Information

Weight 1500 lbs
SKU: 74926 BIN # 10965 Categories: , Tags: ,